How To Build A Platform Bed Frame With Drawers

izammadura7 September 20, 2023 a , bed , build , drawers , frame , how , platform , to , with Comment

Build Queen Size Platform Bed Plans Rustic platform bed, Bed frame from www.pinterest.com

Building your own platform bed frame with drawers can be a fun project and a great way to add storage space to your bedroom. With a few basic tools and materials, you can create a stylish and functional bed frame that will last for years. In this article, we'll take you through the steps to build your own platform bed frame with drawers.

Materials

Before you start building your platform bed frame, you'll need to gather some materials. Here's what you'll need:

4 wooden boards for the frame (measuring 2x8x96 inches each)
4 wooden boards for the legs (measuring 4x4x12 inches each)
2 wooden boards for the headboard and footboard (measuring 2x4x60 inches each)
16 wooden slats for the bed (measuring 1x4x60 inches each)
16 wooden boards for the drawers (measuring 1x6x24 inches each)
Drawer slides
Screws
Wood glue
Sandpaper
Stain or paint

Tools

You'll also need some basic tools to build your platform bed frame:

Table saw or circular saw
Power drill
Drill bits
Countersink bit
Screwdriver bits
Chisel
Hammer
Clamps
Measuring tape

Step-by-Step Instructions

Now that you have your materials and tools, it's time to start building your platform bed frame. Follow these step-by-step instructions:

Step 1: Cut the Wood

Using your table saw or circular saw, cut the wooden boards to the following lengths:

2x8x96 inches: Cut 2 boards to this length for the sides of the frame.
2x8x60 inches: Cut 2 boards to this length for the headboard and footboard.
1x4x60 inches: Cut 16 slats to this length for the bed.
1x6x24 inches: Cut 16 boards to this length for the drawers.

Step 2: Build the Frame

Lay the two 2x8x96 inch boards parallel to each other with the ends flush. Then, lay the two 2x8x60 inch boards perpendicular to the sides, forming a rectangle. Use wood glue and screws to attach the boards together at the corners.

Step 3: Add the Legs

Attach the four 4x4x12 inch legs to the corners of the frame using wood glue and screws. Make sure the legs are flush with the bottom of the frame.

Step 4: Add the Slats

Lay the 16 1x4x60 inch slats across the frame, spacing them evenly. Use wood glue and screws to attach them to the frame.

Step 5: Build the Drawers

Cut the 16 1x6x24 inch boards in half to create 32 pieces. Then, use wood glue and screws to assemble the boards into 16 drawers.

Step 6: Add the Drawer Slides

Attach the drawer slides to the sides of the drawers and the insides of the frame. Make sure the slides are level and spaced evenly.

Step 7: Sand and Stain

Sand the bed frame and drawers to remove any rough edges. Then, apply your choice of stain or paint to the wood.

Step 8: Add the Headboard and Footboard

Attach the 2x4x60 inch boards to the head and foot of the bed frame using wood glue and screws.

Step 9: Install the Drawers

Slide the drawers into place on the drawer slides. Test them to make sure they open and close smoothly.

FAQ

Conclusion

Building your own platform bed frame with drawers can be a rewarding experience and a great way to add storage space to your bedroom. With the right materials and tools, you can create a stylish and functional bed frame that will last for years. Just follow these step-by-step instructions and you'll be sleeping in your new bed in no time!